To ensure that the output of the beamlines is uniform, the initial laser light is amplified from a single source in the Injection Laser System (ILS).

Among the inter cavity doubled lasers VCSELs have shown much promise and potential to be the basis for a mass produced frequency doubled laser.

Appearance The violet 405 nm laser (whether constructed from GaN or frequency doubled GaAs laser diodes) is not in fact blue, but appears to the eye as violet, a color for which a human eye has a very limited sensitivity.

A krypton fluoride laser (KrF laser) is a particular type of excimer laser, which is sometimes (more correctly) called an exciplex laser.

It employs a technique known as collinear holography, whereby a green and red laser beam are collimated in a single beam.

Usually, laser ablation refers to removing material with a pulsed laser, but it is possible to ablate material with a continuous wave laser beam if the laser intensity is high enough.

You could, if you're really smart, you could shine a nonlethal laser on the bug before you zap it, and you could listen to the wing beat frequency and you could measure the size.

So this robot is actually equipped with a camera and a laser rangefinder, laser scanner.

For example, the first working laser was a ruby laser, made from ruby (chromium doped corundum).

Female Voice Long range laser scanning by sending out a pulse that's a laser beam of light.

The Institute is a member of the International Laser Ranging Service (ILRS) and the European Laser Ranging Service.

Plasma frequency The electron plasma frequency (measuring plasma oscillations of the electrons) is large compared to the electron neutral collision frequency (measuring frequency of collisions between electrons and neutral particles).

Laser beam welding (LBW) is a welding technique used to join multiple pieces of metal through the use of a laser.

A random laser uses no optical cavity but the remaining principles of operation remain the same as for a conventional laser.

With advances in production, and commercial sales of low cost laser projectors, 445 nm InGaN laser diodes have dropped in price.

It involved attaching a single particle onto the end of a carbon nanotube and measuring the vibrational frequency of the nanotube both with and without the particle.

Nathan Myhrvold Could this laser zap malaria?

Laser ablation is the process of removing material from a solid (or occasionally liquid) surface by irradiating it with a laser beam.

Now, I put the laser here, and now, when I deal the cards in the laser, I know where they are but yes?

Laser hair removal has become popular because of its speed and efficacy, although some of the efficacy is dependent upon the skill and experience of the laser operator, and the choice and availability of different laser technologies used for the procedure.

See also Hair removal Shaving Depilatory References External links Laser Facts (US Food and Drug Administration) Additional Information on Removing Hair Safely American Academy of Dermatology, Public Resource Center, Laser Hair Removal American Society for Dermatologic Surgery Laser Hair Removal Fact Sheet

The single crystal nickel alloy turbine blades are also hollow, and air is pushed through laser drilled holes in them to cool them because the gas temperature is higher than the melting point of the blades.

A blue laser is a laser that emits electromagnetic radiation with a wavelength between 360 and 480 nanometres, which the human eye sees as blue or violet.

Next we can actually light them up with a laser.

The minimum frequency of administration is the single dose, which usually produces fewer adverse effects than the multiple dosage and at the same time often represents the most economical form of administration.

Were they to be replaced in this capacity by more widely available precision guided weapons, using laser or infrared tracking, an attack could only be made on a single part of the target for each aircraft pass.

While red laser diodes are commercially available, there are no commercially available green laser diodes which can provide the required power at room temperature with an adequate lifetime.

In a laser, what makes laser light so different from the light above my head here is that this light is incoherent many different colors and different frequencies, sort of like the way you clapped initially but if you were a laser, it would be rhythmic applause.

E Spaceship noise SW Even if it doesn't have a laser?

E Laser noise SW Yeah, yeah. That was pretty funny, Einstein.

A slower processor, with regard to clock frequency, can perform as well as a processor operating at a higher frequency.

Lasers In 1962, a group of researchers at Bell Laboratories discovered laser action in xenon, and later found that the laser gain was improved by adding helium to the lasing medium.

445 nm blue laser diodes are currently available on the open market.

The Philippine tarsier, has a high frequency limit of auditory sensitivity of approximately 91 kHz with a dominant frequency of 70 kHz.

The original black and white standard, with its 15750 Hz line frequency and 4.5 MHz audio subcarrier, does not meet these requirements, so designers had either to raise the audio subcarrier frequency or lower the line frequency.

Laser cutting is a technology that uses a laser to cut materials, and is typically used for industrial manufacturing applications, but is also starting to be used by schools, small businesses, and hobbyists.

The carbon dioxide laser (CO2 laser) was one of the earliest gas lasers to be developed (invented by Kumar Patel of Bell Labs in 1964), and is still one of the most useful.

A Laser TV requires lasers in three distinct wavelengths red, green, and blue.

It uses laser tracking for increased pointer accuracy over previous generation Apple mice.

The range finder mounted on the top is a Velodyne 64 beam laser.

Radio frequency engineering is a subset of electrical engineering that deals with devices that are designed to operate in the radio frequency (RF) spectrum.

This laser allows the vehicle to generate a detailed 3D map of its environment.

On the other side of the frequency spectrum are low frequency vibrations, often not detected by hearing organs, but with other, less specialized sense organs.

Powered by the symbology of a myth and the passion of my training, I brought laser sharp focus into my dance, laser sharp focus to such an extent that I danced a few weeks after surgery.

It didn't occur to me you'd increase your frequency.