So a fast rotor, a middle rotor, and a slow rotor.

Rotor

Rotor

Rotor

Heating Coil

Heating Coil

Civil Rotor

Built the Tesla coil.

You've got a coil.

When this rotor does a full turn, it'll kick the next rotor one place.

(B) Heating coil heating cartridge

So in this picture you see that rotor four is spinning faster and rotor two is spinning slower.

So in this picture, you see that rotor four is spinning faster and rotor two is spinning slower.

Eventually, the middle rotor does a full turn, and it will kick the left hand rotor one place.

We lost the tail rotor! It's gone!

And then, the right hand rotor keeps going.

We have 26 starting positions for each rotor.

JULlET Here's such a coil! come, what says Romeo?

What I need to do is wind a coil.

Now, when electric current was applied to the coil,

This is the rough idea behind rotor encryption machines.

The Enigma is a kind of complicated rotor machine.

And if you manipulate the speed of this rotor, you are actually able to crack the rotor and eventually even have the centrifuge explode.

And the other way around, if you increase the speed of rotor three and decrease the speed of rotor one, then the robot pitches forward.

And the other way around, if you increase the speed of rotor three and decrease the speed of rotor one, then the robot pitches forward.

This destroyed the uniform distribution of the initial rotor position, and after repeated observations, it allowed the allies to reverse engineer the rotor wirings completely.

Whenever current flows through the coil, this becomes an electromagnet.

First, we choose from 1 of 6 possible rotor orderings.

Then we select an initial position from the rotor sequence.

And there's a rotor there that this motor is spinning.

We lost the tail rotor! It's gone! 64 is going down!

The coil and the tail together make up the total height, H.

You lock in on the liquid rope coil effect. It's pretty cool.

A pressure drop occurs across both the stator and the rotor, with steam accelerating through the stator and decelerating through the rotor, with no net change in steam velocity across the stage but with a decrease in both pressure and temperature, reflecting the work performed in the driving of the rotor.

This section is call the coil, and this section is called the tail.

Understand that each rotor position is equivalent to a location in the sequence.

When the rotor advanced, an entirely new path was defined for each letter.

Because I want to get my coil to have about 4 ohms of resistance.

So we were able to associate the small digital warhead with the rotor control.

A Tesla coil is an electrical resonant transformer circuit invented by Nikola Tesla around 1891.

The vessel is heated at the desired rate by applying power to the heating coil.

a magnetic field would push through the middle of the coil, and around the outside.

A second prototype with an improved rotor design was unveiled in March 2004 at Rosvertol.

We've been hit. Super 68, there is smoke coming from the top of your rotor.

Each rotor wheel had electrical contacts on either side with a maze of wirings within.