And the scattering wind scattering .

Because even a low powered green laser is visible at night through Rayleigh scattering from air molecules, this type of pointer is used by astronomers to easily point out stars and constellations.

A krypton fluoride laser (KrF laser) is a particular type of excimer laser, which is sometimes (more correctly) called an exciplex laser.

by the scatterers scattering

Scattering far and wide .

Such interaction between the light and free electrons is called Thomson scattering or Linear Thomson scattering.

Usually, laser ablation refers to removing material with a pulsed laser, but it is possible to ablate material with a continuous wave laser beam if the laser intensity is high enough.

By the scatterers ( the wind ) scattering ,

and by the scatterers scattering ( rain )

By those winds scattering dust dispersing

And when the stars fall , scattering ,

And when the stars fall , scattering ,

So this robot is actually equipped with a camera and a laser rangefinder, laser scanner.

For example, the first working laser was a ruby laser, made from ruby (chromium doped corundum).

Some of methods are based on light scattering.

By the scattering winds that scatter the clouds

Female Voice Long range laser scanning by sending out a pulse that's a laser beam of light.

The Institute is a member of the International Laser Ranging Service (ILRS) and the European Laser Ranging Service.

These methods include microelectrophoresis, electrophoretic light scattering and electroacoustics.

Small angle X ray scattering (SAXS) is a small angle scattering (SAS) technique where the elastic scattering of X rays (wavelength 0.1 ... 0.2 nm) by a sample which has inhomogeneities in the nm range, is recorded at very low angles (typically 0.1 10 ).

In quantum physics, the scattering amplitude is the amplitude of the outgoing spherical wave relative to the incoming plane wave in a stationary state scattering process.

Laser beam welding (LBW) is a welding technique used to join multiple pieces of metal through the use of a laser.

A random laser uses no optical cavity but the remaining principles of operation remain the same as for a conventional laser.

With advances in production, and commercial sales of low cost laser projectors, 445 nm InGaN laser diodes have dropped in price.

Nathan Myhrvold Could this laser zap malaria?

Laser ablation is the process of removing material from a solid (or occasionally liquid) surface by irradiating it with a laser beam.

Now, I put the laser here, and now, when I deal the cards in the laser, I know where they are but yes?

The scattering pattern contains the information on the structure of the sample.

Laser hair removal has become popular because of its speed and efficacy, although some of the efficacy is dependent upon the skill and experience of the laser operator, and the choice and availability of different laser technologies used for the procedure.

See also Hair removal Shaving Depilatory References External links Laser Facts (US Food and Drug Administration) Additional Information on Removing Hair Safely American Academy of Dermatology, Public Resource Center, Laser Hair Removal American Society for Dermatologic Surgery Laser Hair Removal Fact Sheet

To ensure that the output of the beamlines is uniform, the initial laser light is amplified from a single source in the Injection Laser System (ILS).

A blue laser is a laser that emits electromagnetic radiation with a wavelength between 360 and 480 nanometres, which the human eye sees as blue or violet.

Next we can actually light them up with a laser.

Each is scattering away at random to try to save its scales or feathers.

While red laser diodes are commercially available, there are no commercially available green laser diodes which can provide the required power at room temperature with an adequate lifetime.

In a laser, what makes laser light so different from the light above my head here is that this light is incoherent many different colors and different frequencies, sort of like the way you clapped initially but if you were a laser, it would be rhythmic applause.

E Spaceship noise SW Even if it doesn't have a laser?

E Laser noise SW Yeah, yeah. That was pretty funny, Einstein.

Lasers In 1962, a group of researchers at Bell Laboratories discovered laser action in xenon, and later found that the laser gain was improved by adding helium to the lasing medium.

ARPES can be used to determine the direction, speed and scattering of electrons within the material.

445 nm blue laser diodes are currently available on the open market.

Laser cutting is a technology that uses a laser to cut materials, and is typically used for industrial manufacturing applications, but is also starting to be used by schools, small businesses, and hobbyists.

The carbon dioxide laser (CO2 laser) was one of the earliest gas lasers to be developed (invented by Kumar Patel of Bell Labs in 1964), and is still one of the most useful.

In these equations, scattering and reflection are considered to be close to zero or otherwise accounted for.

A Laser TV requires lasers in three distinct wavelengths red, green, and blue.