Before attaching the Coolant Level Sensor to the Coolant Tank, check that it shows the correct

Remove the cover from the coolant level sensor jack, insert the connector, and re install the cover cap

Before attaching the coolant level sensor to the coolant tank check that it registers the correct empty, 1 2 full, and full positions on the Current Commands page

Coolant level indicator

Attach the three quarter inch Coolant Line from the Coolant Manifold to the standard Coolant Pump

Place the standard coolant pump next and connect the 3 4 coolant line from the coolant manifold to the pump

Connect the electrical cord from the standard Coolant Pump to the receptacle labeled Coolant

Second, level the machine front to back and side to side to permit good coolant and chip flow

Sensor

Sensor

To clear the coolant tank

Sensor left

Sensor right

Sensor bottom

Sensor top

Sensor Alarm

Sensor Resolution

Sensor Logger

Sensor Name

Remove Sensor

Edit Sensor...

Sensor Browser

Trilinear sensor

When the sodium potassium alloy is used as a coolant in nuclear reactors, is created which makes the coolant radioactive.

Sensor Logger Settings

Drop Sensor Here

Once the Coolant Tank is full operate the Coolant System to check that none of the connections just made are leaking

Move to the coolant pump area and attach the wash down hose assembly to the mounting point on the coolant manifold

Remove the cover from the Level Sensor Cable Receptacle, engage the Connector and re install the Cover Cap

Install the Coolant Tank Handle onto the Tank

And I'm going to insert a coolant command

When the coolant tank is full, run each part of the coolant system to check that none of the connections are leaking

Sensor exceeded critical limit

Color sequential area sensor

Color sequential linear sensor

This is an empty space in a worksheet. Drag a sensor from the Sensor Browser and drop it here. A sensor display will appear that allows you to monitor the values of the sensor over time.

One chip color area sensor

Two chip color area sensor

Three chip color area sensor

This is actually sensor firings.

I wanted to turn coolant on, I had forgotten it

And there is the coolant command inserted into the program

When all coolant pump connections are complete ask the customer to fill the coolant tank so the connections that were just made can be tested for leaks

It's really just a pressure sensor

Each of these has a sensor.