We've got a conveyor there.

Those are conveyor belts that go around.

like a centaur on a conveyor belt.

You can operate the chip conveyor in Setup mode but you must press and hold the conveyor key CHlP FWD

Nothing's written down no courses, no bearings, nothin',

Connect the Electrical Cable to the receptacle labeled Conveyor

It's all conveyor belt, and it makes a book.

The world community seems to be losing its strategic bearings.

Ask someone to assist you to hold the weight of the Chip Conveyor while you unfasten the Shipping Security Screws and lower the Conveyor into position

The left, which had previously looked to Marx, lost its bearings.

ABC obtains a loan from Lender B to finance the purchase and installation of the conveyor equipment from Vendor C, secured by a security right in the conveyor equipment.

Change, to our mind, is like a conveyor belt endless and ever moving.

Route the Electrical Cable neatly from the Conveyor Motor down to the receptacle

It snows so much that everything looks white and you lose your bearings.

Ah, ah! There it is. It's picked up the object off the conveyor.

Take your bearings now so you can find it when you need it.

With electricity supplied to the Conveyor press the CHlP FWD key to make sure the Conveyor Belt feeds smoothly with no binding or dragging inside the Enclosure and at the Chip Discharge Point

If a Chip Guide Bracket is included with the Conveyor Accessories, install it now

Move to the Belt Tensioning Bolts and tighten them inwards towards the Conveyor Motor

And it has all kinds of levers and ball bearings and gadgets and gauges.

You and I must never lose our bearings, Sofia... not even for an instant.

If people want to step off the conveyor belt, they are free to do so.

Connect both coolant pump power cables as well as the power cable for the chip conveyor

Once installed push the Conveyor back in towards the center of the Machine until it is fully seated

The phosphates are transported to the coast by an automated conveyor belt, the longest such belt in the world.

Provision is also made for satellite to ground finders, which determine the exact location and bearings of the mines.

With the conveyor lowered install the Bracket Screws back into the holes they came from on the Enclosure Side Panel

This is one of the conveyor belts with the thing going by, but then you'll see the ones up above.

In short, the global economy replete with get rich quick schemes, overpaid bosses, and corporate fraud has lost its moral bearings.

I'm sorry, but 100 for a bum watch like this... and a hunk of tin with a couple of ball bearings...

With my husband almost well again, I had it in mind to take a little walk... sort of get one's bearings.

Note that any chip conveyor support screws or brackets should not be touching the ground until after the leveling procedure is complete

Small units often have direct drive generators, direct current output, aeroelastic blades, lifetime bearings and use a vane to point into the wind.

Start with the screws on the chip conveyor side followed by two of the four screws on the left side of the panel

In earlier years, Dr. Khan and his collaborators published a number of papers detailing critical issues regarding the balancing of centrifuges and magnetic bearings.

And yet, there is one great problem with movement, and that is that it's really hard to get your bearings when you're in midair.

Using the optical or prism sight, such compasses can be read with extreme accuracy when taking bearings to an object, often to fractions of a degree.

By carefully recording distances (time or paces) and magnetic bearings traveled, one can plot a course and return to one's starting point using the compass alone.

Remove the four Screws connecting the Conveyor Shipping Brackets to the Machine Enclosure and carefully lower the section until it is set in the installed position

Inside of the bronze ball there's a lead weight that is free swinging on an axle that's on two bearings that pass in between, across it,

from the beginning to the end, keeping nothing back but the bearings of the island, and that only because there is still treasure not yet lifted,

It's full of all kinds of gyroscopes and pulleys and gadgets and ball bearings, and they don't work as well as they ought to in the heat of battle.

Under the purchase agreement with Vendor C, ABC is required to pay the purchase price for the conveyor equipment when it is installed in ABC's plant and rendered operational.

It's full of all kinds of gyroscopes and pulleys and gadgets and ball bearings, and they don't work as well as they ought to in the heat of battle.

For example the power of a drill (or any other machine) is proportional to the volume, while the friction of the drill's bearings and gears is proportional to their surface area.