In polymer chemistry, a structural unit is a building block of a polymer chain.

It's a gas injected polymer chair.

Solid fuels include wood (see wood fuel), charcoal, peat, coal, Hexamine fuel tablets, and pellets made from wood (see wood pellets), corn, wheat, rye and other grains.

And we chop those strands into what are called pellets.

The pellets are then granulated and dried in the sun.

Another area I started thinking about involved creating new polymer materials.

This is an idea for a gas injected, one piece polymer chair.

You've got non lethal shotgun rounds that contain rubber pellets instead of the traditional metal ones.

It has no plans to acquire other air launched bombs of this type (grenades, pellets, etc.).

Increasingly, wood is used in pellet heating systems (using pellets made from dried natural wood chippings).

Non polymer materials can also be used as the matrix for carbon fibers.

With that, and the pellets of shotgun in his back, Elshamy decides to call it a day

In the case of polymer nanocomposites we can use the properties of disordered systems.

There is a possibility of building ordered arrays of nanoparticles in the polymer matrix.

Half of each year's 100 billion points of thermal plastic pellets will be made into fast track trash.

Carbon fiber reinforced polymer, carbon fiber reinforced plastic or carbon fiber reinforced thermoplastic (CFRP, CRP, CFRTP or often simply carbon fiber, or even carbon), is an extremely strong and light fiber reinforced polymer which contains carbon fibers.

So, Dan Barber , if you want billions of chicken pellets for your fish farm, I know where to get them.

(iv) Kahawa coal. These are pellets made by grinding the wastes from coffee husks and mixing them with clay and water.

Organic semiconductors (polymer, oligomer) developed thus far have carrier mobilities below 10 cm2 (V s), and usually much lower.

Here recent developments in the field of polymer nano composites and some of their applications have been reviewed.

The polymer melt is usually produced by heating from either resistance heating, circulating fluids, air heating or lasers.

This is an interesting copolymer variant in that one of the ingredients was a polymer to begin with.

That, along with the three pellets I sustained in the back, was my cue to leave. Mosa'ab Elshamy ( mosaaberizing) August 14, 2013

This relatively simple process uses only one amide solvent, and therefore spinning can be done directly after the polymer production.

The article is based on the book, Inventing Polymer Science Staudinger, Carothers, and the Emergence of Macromolecular Chemistry by Yasu Furukawa.

Like rabbits, after eating they initially produce soft green feces, which they eat again to take in further nutrition, before producing the final, solid, fecal pellets.

It goes with the flow of the polymer and you'll see there's an image coming up right now that shows the full thing.

In the third step, the specimen is then placed in a bath of liquid polymer, such as silicone rubber, polyester or epoxy resin.

As the acetone vaporizes and leaves the cells, it draws the liquid polymer in behind it, leaving a cell filled with liquid plastic.

The Austrian steel producer Voestalpine AG, for example, will start producing steel pellets in the southern US that will then be upgraded to high quality alloys in Austria.

The signal is produced by electrochemical and physical changes in the conducting polymer layer due to changes occurring at the surface of the sensor.

The testimonies of citizens and doctors came to confirm that Tunisian security forces used hunting rifles in Siliana to disperse protesters and wounded some of them with bullet pellets.

Also, to standardize the pellets, the food rewards, and to semi automate this in order to replicate this on a much larger scale and affect the lives of many more people.

So, living at the equator, we got lots and lots of ultraviolet radiation and the melanin this wonderful, complex, ancient polymer compound in our skin served as a superb natural sunscreen.

It actually takes things we would consider waste things like seed husks or woody biomass and can transform them into a chitinous polymer, which you can form into almost any shape.

On the lower left there is a picture of mother of pearl forming out of seawater. It's a layered structure that's mineral and then polymer, and it makes it very, very tough.

Moreover, the FDA s approval of polymer based local chemotherapy created a new paradigm in the drug delivery field, helping to pave the way for drug eluting stents and other local delivery systems.

Let's give it intelligence. We give it all the computing power it needs a 1.5 gigahertz Pentium M chip, two FireWire cameras, rate gyros, accelerometers, four force sensors on the foot, lithium polymer batteries.

Something similar happened when Jay Vacanti, a surgeon at Massachusetts General Hospital, and I had an idea in the 1980 s to combine three dimensional synthetic polymer scaffolds with cells to create new tissues and organs.

I would love to build this one day, and perhaps I'd like to build it also out of flour, sugar, polymer, wood chips I don't know, human hair. I don't know. I'd love a go at that.

In this process the particulate core material, which is solid, is dispersed into the supporting air stream and these suspended particles are coated with polymers in a volatile solvent leaving a very thin layer of polymer on them.

And the way it works is that there's a pump at the bottom, which periodically sends some of this liquid nutrient solution up to the top, which then trickles down through plants' root systems that are suspended in clay pellets so there's no dirt involved.

Proton exchange membrane fuel cells, also known as polymer electrolyte membrane (PEM) fuel cells (PEMFC), are a type of fuel cell being developed for transport applications as well as for stationary fuel cell applications and portable fuel cell applications.

The amino group and the carboxylic acid group can be on the same monomer, or the polymer can be constituted of two different bifunctional monomers, one with two amino groups, the other with two carboxylic acid or acid chloride groups.

He altered this mouse so that it was genetically engineered to have skin that was less immunoreactive to human skin, put a polymer scaffolding of an ear under it and created an ear that could then be taken off the mouse and transplanted onto a human being.