A potato chip!

(b) Gold foil activation gold foil is susceptible to activation by neutrons.

Set the target CCD chip temperature.

In 1976, a team led by Jerry Herzog integrated the two chips into one, the 1802.

Snowflake image taken by CaptPiper and used according to Creative Commons License.

And I cut off a little flake of gold.

You can operate the chip conveyor in Setup mode but you must press and hold the conveyor key CHlP FWD

Frederick Balagadde Bio lab on a microchip

This is a microfluidic chip that I developed.

Potato chip shapes aren't isometric to flat sheets.

They self aggregated into a network, became an integrated chip.

All fingerprint information is encrypted and stored inside the Secure Enclave in a new A7 chip.

look inside a silicon chip. It's just so tiny.

We observe the cells in a plate, and they're just on the surface.

So what we're looking at here is a tiny computer chip.

The retina chip extracts four different kinds of information.

With electricity supplied to the Conveyor press the CHlP FWD key to make sure the Conveyor Belt feeds smoothly with no binding or dragging inside the Enclosure and at the Chip Discharge Point

Shape retaining is common in metal you bend a piece of aluminum foil, and it holds its place.

Attach the Clamping Band outside the Chip Skirt and fashion at the Discharge Port

The retina chip that we designed sits behind this lens here.

For example, will it have a faster processing chip in it than the current one? And the answer is of course it will.

The information is sent from the computer processor to the BIOS into a chip controlling the data transfer.

When the wafer is processed in the stepper, the pattern on the reticle (which may contain a number of individual chip patterns) is exposed repeatedly across the surface of the wafer in a grid.

Then on the right we can see a cymatically created snowflake.

You might have a component. Let's say a graphics chip that goes inside of someone else's laptop.

The data are then passed to a chip on the circuit board that controls the access to the drive.

Whereas that chip bag has about seven layers to do all of those things.

YM2610, aka OPNB, is a fifteen channel sound chip developed by Yamaha.

If a Chip Guide Bracket is included with the Conveyor Accessories, install it now

Connect both coolant pump power cables as well as the power cable for the chip conveyor

It's almost like ... imagine a snowflake in your hand, and you look at it, and it's an incredibly complicated, beautiful object.

With such progressively smaller circuits, more can be fitted on a computer chip.

So, all we would need to do is to fit a small microchip to every potential illumination device.

What you notice here is that these snapshots taken from the output of the retina chip are very sparse, right?

So, for example, here on the left we can see a snowflake as it would appear in nature.

They have a computer chip strapped to their backs, and they can fly these creatures around the lab.

MIT just has a new radio chip that uses far less power than our chips.

Software must be written to identify the correct value of the MSB bits on any given chip.

Some programs have been created specifically for writing AY chip music, such as Vortex Tracker.

This is accomplished by moving the wafer back and forth and left and right under the lens of the stepper.

There's the map showing, on the left hand side, that hospital actually that's a hospital ship.

This is a silicon wafer, and essentially that's just a whole bunch of layers of two dimensional stuff, sort of layered up.

MlT just has a new radio chip that uses far less power than our chips.

The stepper gets its name from the fact that it moves or steps the wafer from one shot location to another.

A single 32 bit GDDR5 chip has about 67 signal pins and the rest are power and grounds in the 170 BGA package.