The Magellan probe, which mapped the planet Venus from 1990 to 1994, was named after Magellan.

Mariner 9 (Mariner Mars '71 Mariner I) was an unmanned NASA space probe that contributed greatly to the exploration of Mars and was part of the Mariner program.

Laser beam welding (LBW) is a welding technique used to join multiple pieces of metal through the use of a laser.

Now, I put the laser here, and now, when I deal the cards in the laser, I know where they are but yes?

The Institute is a member of the International Laser Ranging Service (ILRS) and the European Laser Ranging Service.

A random laser uses no optical cavity but the remaining principles of operation remain the same as for a conventional laser.

It transmitted a total of 6,315 TV images to the Earth.

Among the inter cavity doubled lasers VCSELs have shown much promise and potential to be the basis for a mass produced frequency doubled laser.

Next we can actually light them up with a laser.

This laser allows the vehicle to generate a detailed 3D map of its environment.

To date most ICF experiments have used lasers to heat the target.

And that was the deployment of the Huygens probe, the European built Huygens probe that Cassini had carried for seven years across the solar system. We deployed it to the atmosphere of Titan, it took two and a half hours to descend, and it landed on the surface.

A Laser TV requires lasers in three distinct wavelengths red, green, and blue.

These lasers combine high overall efficiency with good beam quality.

445 nm blue laser diodes are currently available on the open market.

Usually, laser ablation refers to removing material with a pulsed laser, but it is possible to ablate material with a continuous wave laser beam if the laser intensity is high enough.

Luna 16 was the first robotic probe to land on the Moon and safely return a sample of lunar soil back to Earth.

So this robot is actually equipped with a camera and a laser rangefinder, laser scanner.

It uses laser tracking for increased pointer accuracy over previous generation Apple mice.

Three frequencies ( colors ) of lasers are used for full ionization of uranium 235.

The range finder mounted on the top is a Velodyne 64 beam laser.

Laser hair removal has become popular because of its speed and efficacy, although some of the efficacy is dependent upon the skill and experience of the laser operator, and the choice and availability of different laser technologies used for the procedure.

Because even a low powered green laser is visible at night through Rayleigh scattering from air molecules, this type of pointer is used by astronomers to easily point out stars and constellations.

It was the second of the series to be launched into space, following the Hubble Space Telescope.

Uses When lasers were invented in 1960, they were called a solution looking for a problem .

The AVLIS system consists of a vaporizer and a collector, forming the separation system, and the laser system.

Mobile speed laser cameras have also been introduced to enhance detection of those who speed.

Lasers In 1962, a group of researchers at Bell Laboratories discovered laser action in xenon, and later found that the laser gain was improved by adding helium to the lasing medium.

For example it is used in the carbon dioxide laser, which is one of the earliest type of lasers.

babadeye العالم الليلة يتابع حدث نزول مسبار كيوريوسيتي علي المريخ،ونحن نتابع مسرحية _الجنرال الذي لا يمتلك شهادة ثانوية Curiositylands موريتانيا babadeye Tonight, the world is following Curiosity landing on Mars, and we are watching the play of the general who does not have a high school degree

The probe arrived in Mars' orbit in September 2014, at approximately the same time as India's Mars Orbiter Mission.

Week after week, the melt probe will sink of its own weight through the ancient ice, until finally Now, what are you going to do when you reach the surface of that ocean?

The only close up images of Ariel were obtained by the Voyager 2 probe, which photographed the moon during its flyby of Uranus in January 1986.

Exploration So far the only close up images of Umbriel have been from the Voyager 2 probe, which photographed the moon during its flyby of Uranus in January 1986.

Today, blue lasers use a sapphire surface covered with a layer of gallium nitride (this technology is used by Japanese company Nichia, which has an agreement with Sony), and blue semiconductor lasers use a gallium nitride mono crystal surface (Polish company TopGaN).

See the United Nations Treaty Series search engine, online at http untreaty.un.org English access.asp (accessed 8 November 2004).

In a laser, what makes laser light so different from the light above my head here is that this light is incoherent many different colors and different frequencies, sort of like the way you clapped initially but if you were a laser, it would be rhythmic applause.

At about this time they were visited by Steve Jobs, who urged them to adapt PostScript to be used as the language for driving laser printers.

The polymer melt is usually produced by heating from either resistance heating, circulating fluids, air heating or lasers.

The astronomer Carl Sagan suggested that the Voyager space probe capture an image of earth as it reached the outer reaches of our solar system. It did so, in 1990, and Earth shows up in a grainy image as a pale blue dot.

The Google Lunar X Prize competition offers a 20 million award for the first privately funded team to land a robotic probe on the Moon.

So the way the Apollonian personality takes a picture, or hangs a picture, is they'll get out a transit and a laser level and a micrometer.

Following protracted development, blue laser diodes operating at 405 nanometers became available on a production basis.

Some green lasers operate in pulse or quasi continuous wave (QCW) mode, to reduce cooling problems and prolong battery life.

Blue lasers can also be fabricated directly with InGaN semiconductors, which produce blue light without frequency doubling.