Gears

Gear size

In the middle we have a motor, and we also have a gear in it, and we use the gear to transfer the circulation of the motor.

So I want change gears.

In the middle we have a motor, and we also have a gear in it, and we use the gear to transfer the circulation of the motor.

Engines, gearshift four choices.

This showed a set of interlocking gears of astounding ingenuity.

After many years of bending gears with a pair of pliers,

Gear cutting machines came into use in the 18th century.

After many years of bending gears with a pair of pliers, I made that tool, and then I made this other tool for sort of centering gears very quickly sort of developing my own little world of technology.

So, we have a motor here on the left, and it goes through a gear train.

Hardened steel gears are used for extended operation above 7000 or 8000 rpm.

1.80 an hour, so some fink in a Cadillac could drive it without havin' to shift gears.

In June 2010, it was announced that Drake would have a prominent role in the video game Gears of War 3 .

I can give you fast control with low reduction ratios in these gears, or I can give you power

So, before you can work with the laws of Einstein, you have to work with the laws of friction, leavers, pullies, and gears.

I can give you fast control with low reduction ratios in these gears, or I can give you power I can't give you both.

Scientists compared the numbers inscribed in the text... ...to the number of teeth in the gears and their arrangement... ...and applied these to the known astronomical cycles of antiquity.

I made that tool, and then I made this other tool for sort of centering gears very quickly sort of developing my own little world of technology.

There are 12 pairs of 50 1 reductions, so that means that the final speed of that gear on the end is so slow that it would take two trillion years to turn once.

A simple machine, such as a lever, pulley, or gear train, is ideal if the power input is equal to the power output of the device, which means there are no losses.

With spur gears, a gear of 12 teeth (the smallest size permissible, if designed to good engineering practices) would have to be matched with a 240 tooth gear to achieve the same ratio of 20 1.

Because people at the top of the chain, people like you, I think, are starting to realize that there's too much speed in the system, there's too much busyness, and it's time to find, or get back to that lost art of shifting gears.

As with the 2011 concept XL1, it is powered by an 800 cm3 two cylinder diesel engine with and a electric motor, delivering power to the rear wheels through a seven speed dual clutch gearbox.