Move to the coolant pump area and attach the wash down hose assembly to the mounting point on the coolant manifold

Attach the three quarter inch Coolant Line from the Coolant Manifold to the standard Coolant Pump

Place the standard coolant pump next and connect the 3 4 coolant line from the coolant manifold to the pump

Coolant level indicator

Connecting the 1 2 hose directly to the hose barb, with a hose clamp, is preferred

This is the faster hose, this is the slower hose.

Connect the electrical cord from the standard Coolant Pump to the receptacle labeled Coolant

It is recommended that the 1 2 hose is connected directly to the Hose Barb with a Hose Clamp

We have a faster hose, and then we have a slower hose.

To clear the coolant tank

Before attaching the Coolant Level Sensor to the Coolant Tank, check that it shows the correct

Somebody get the fire hose!

Was she wearing hose? No.

When the sodium potassium alloy is used as a coolant in nuclear reactors, is created which makes the coolant radioactive.

Once the Coolant Tank is full operate the Coolant System to check that none of the connections just made are leaking

Install the Coolant Tank Handle onto the Tank

And I'm going to insert a coolant command

When the coolant tank is full, run each part of the coolant system to check that none of the connections are leaking

The faster hose takes 20 minutes.

Hey. Get out the fire hose.

We'll take the hose with us.

Come on and get that hose!

I'm gonna change the muffler hose.

Slower hose takes 30 minutes per pond.

I have an oxygen hose connected here.

We've created the green hose for lawns.

Get in. Yeah, I'll change that hose.

Wait, if we take a radiator hose and shove it down take a radiator hose and shove it down his throat.

I wanted to turn coolant on, I had forgotten it

And there is the coolant command inserted into the program

So 10 minutes faster than the other hose.

We have the rate of the slower hose.

20 minutes per pond is the fast hose.

When all coolant pump connections are complete ask the customer to fill the coolant tank so the connections that were just made can be tested for leaks

Maybe I forgot to turn coolant on before a particular tool

Before attaching the coolant level sensor to the coolant tank check that it registers the correct empty, 1 2 full, and full positions on the Current Commands page

By attaching the Energy Shell 2 to your hose

How many pounds per minute for the faster hose?

How many pounds per minute for the slower hose?

You're not supposed to play with the fire hose!

When the decays, it causes a buildup of magnesium in the coolant.

leaving the machine clean with nothing remaining to contaminate the customer's coolant

lower end of the machine to maintain clearance to the coolant tank

For other people, it's a guy with a garden hose.

And let's say that the faster hose fills the pond.