A krypton fluoride laser (KrF laser) is a particular type of excimer laser, which is sometimes (more correctly) called an exciplex laser.

The carbon dioxide laser (CO2 laser) was one of the earliest gas lasers to be developed (invented by Kumar Patel of Bell Labs in 1964), and is still one of the most useful.

It employs a technique known as collinear holography, whereby a green and red laser beam are collimated in a single beam.

E Laser noise SW Yeah, yeah. That was pretty funny, Einstein.

They are also used in conjunction with silicon to produce hybrid silicon lasers.

E Spaceship noise SW Even if it doesn't have a laser?

Usually, laser ablation refers to removing material with a pulsed laser, but it is possible to ablate material with a continuous wave laser beam if the laser intensity is high enough.

So this robot is actually equipped with a camera and a laser rangefinder, laser scanner.

Metal ion lasers are gas lasers that generate deep ultraviolet wavelengths.

Thin disk lasers have been shown to produce beams of up to one kilowatt.

For example it is used in the carbon dioxide laser, which is one of the earliest type of lasers.

The one on the top right here is actually a dazzling laser intended to just blind the person momentarily and disorient them.

The design uses 192 beamlines in a parallel system of flashlamp pumped, neodymium doped phosphate glass lasers.

For example, the first working laser was a ruby laser, made from ruby (chromium doped corundum).

Laser ablation is the process of removing material from a solid (or occasionally liquid) surface by irradiating it with a laser beam.

And there are simple things like, for instance, we have a small laser in the sniffer hole where the animal has to stick for five seconds.

But sometime ago, through the help of an opthamologist colleague of mine, Carmen Puliafito, who developed a laser scanner of the retina, I found out the the following.

The light from the high power IR laser diodes is converted into visible light by means of extra cavity waveguided second harmonic generation.

In 1992 Japanese inventor Shuji Nakamura invented the first efficient blue LED, and four years later, the first blue laser.

With advances in production, and commercial sales of low cost laser projectors, 445 nm InGaN laser diodes have dropped in price.

In 1985 the Los Alamos National Laboratory completed a test firing of an experimental KrF laser with an energy level of 1.0 104 joules.

Concurrently, researchers at Xerox PARC had developed the first laser printer and had recognized the need for a standard means of defining page images.

Some companies, such as Rausch Electronics USA, incorporate a series of lasers in the camera to accurately measure the pipe diameter and other data.

In 1999, Nakamura tried Polish crystals, producing lasers with twice the yield and ten times the lifetime 3,000 hours at 30 mW.

An announcement in 2009 of a direct green laser (which does not require doubling) promises much higher efficiencies and could foster the development of new color video projectors.

You could, if you're really smart, you could shine a nonlethal laser on the bug before you zap it, and you could listen to the wing beat frequency and you could measure the size.

It outsold the Mazda 323, despite being almost identical to it, because the Laser was manufactured in Australia and Ford was perceived as a local brand.

A blue laser is a laser that emits electromagnetic radiation with a wavelength between 360 and 480 nanometres, which the human eye sees as blue or violet.

In Australia, the Laser was one of Ford Australia's most successful models, and was manufactured in Ford's Homebush plant from 1981 until the plant's closure in September 1994.

The first solid state laser, invented in 1960, was pumped by a xenon flash lamp, and lasers used to power inertial confinement fusion are also pumped by xenon flash lamps.

In New Zealand, the Ford Laser and Telstar were assembled alongside the Mazda 323 and 626 until 1997, at the Vehicle Assemblers of New Zealand (VANZ) plant in Wiri, Auckland.

He and Dr. Milton Feng run a transistor laser research center at the University funded by 6.5 million from the United States Department of Defense through DARPA.

And the fun part and I'm quite focused on it I tell people I used to be a light bulb, but now I'm a laser I'm just going to get that thing built, and it turns out it's not so hard.

The utility of a code of conduct that includes elements of no deployment of weapons and use of no harmful lasers (taking into account the fact that not all kind of lasers can be banned).

While red laser diodes are commercially available, there are no commercially available green laser diodes which can provide the required power at room temperature with an adequate lifetime.

And we're going to show you, instead of the kill laser, which will be a very brief, instantaneous pulse, we're going to have a green laser pointer that's going to stay on the mosquito for, actually, quite a long period of time otherwise, you can't see it very well.

Lasers In 1962, a group of researchers at Bell Laboratories discovered laser action in xenon, and later found that the laser gain was improved by adding helium to the lasing medium.

The single crystal nickel alloy turbine blades are also hollow, and air is pushed through laser drilled holes in them to cool them because the gas temperature is higher than the melting point of the blades.

By the time the mistake was discovered, on 14 January 2003, 784 individuals (six of whom were the appellants for this case) had already placed 1008 purchase orders via the Internet for 4086 laser printers.

Semiconductor lasers with blue beams are typically based on gallium(III) nitride (GaN violet color) or indium gallium nitride (often true blue in color, but also able to produce other colors).

If testing showed that the central processing unit was working but the FPU was defective, the FPU's power and bus connections were destroyed with a laser and the chip was sold as an SX if the FPU worked it was sold as a DX.

Eventually however, the desired line widths became narrower than what was possible using mercury lamps, and near the middle of the 2000s, the semiconductor industry moved towards steppers that employed krypton fluoride (KrF) excimer lasers producing 248 nm light.

On 8 January 2003, a website operated in Singapore by Digiland, a Singapore company (the respondent), advertised on sale a laser printer worth Singapore dollars (S ) 3,854 for only S 66.

In a laser, what makes laser light so different from the light above my head here is that this light is incoherent many different colors and different frequencies, sort of like the way you clapped initially but if you were a laser, it would be rhythmic applause.

Eager to achieve a patent on his invention, and believing incorrectly that he needed to build a working laser to do this, Gould left Columbia without completing his doctoral degree and joined a private research company, TRG (Technical Research Group).